Fortunately, understanding what this error means can help you identify what’s wrong. There are also a few simple checks you can perform before arranging professional repairs.

What Does the E2 Error Mean on a Xiaomi Air Fryer?
The E2 error on a Xiaomi air fryer typically indicates a short circuit in the temperature sensor circuit. Xiaomi confirms this meaning for several models, including the Smart Air Fryer Pro 4L, 4.5L, 5.5L, and 6.5L models.
Inside your air fryer is a temperature sensor, commonly known as an NTC thermistor. This component changes its electrical resistance as the temperature inside the cooking chamber changes. The control board interprets these changes and regulates the heating element accordingly, helping maintain the temperature you’ve selected.
If the sensor circuit develops a short, the control board can no longer obtain a reliable temperature reading. Consequently, your air fryer may refuse to heat, interrupt an ongoing cooking program, or display the error immediately after being switched on.
Unlike the E1 error, which generally indicates a disconnected or broken sensor circuit, E2 indicates an abnormally low resistance within the circuit. Although the fault can sometimes appear intermittently, you shouldn’t continue cooking while the error is present. Accurate temperature monitoring is essential for safe operation.
Xiaomi Air Fryer E2 Error: Likely Causes
Several faults can interfere with the temperature sensing system inside your Xiaomi air fryer. While some involve the sensor itself, others originate from the electrical components connected to it.
1. A Faulty Temperature Sensor
A damaged temperature sensor is one of the primary suspects when your Xiaomi air fryer displays E2. The sensor operates within a specific electrical resistance range, which allows the control board to determine how hot the cooking chamber is.
Excessive electrical stress, deterioration, or internal component damage can affect the sensor’s resistance. If the sensor develops an internal short circuit, its resistance may fall significantly below the expected value, triggering the error.
You might notice that the air fryer displays E2 even when it has been sitting unused overnight and is completely cold. This suggests that the problem may be electrical rather than a result of excessive cooking temperatures. However, confirming a defective sensor requires proper testing.
2. Damaged Temperature Sensor Wiring
The temperature sensor communicates with the control board through electrical connections. These connections must remain intact and properly insulated for the system to work correctly.
If the protective insulation surrounding two sensor wires deteriorates and allows their conductors to touch, an unintended electrical connection can form. Physical damage, excessive heat, or improper previous repairs can contribute to this problem.
A wiring fault may produce an intermittent E2 error that disappears when the appliance cools down. As the internal components warm up during cooking, movement caused by thermal expansion may affect the damaged connection again. Unfortunately, you generally can’t confirm this problem without opening the appliance.
3. Moisture Inside the Air Fryer
Although your Xiaomi air fryer is intended for everyday kitchen use, its electrical components must remain protected from liquid. Accidentally allowing water or cleaning solution into the main housing can interfere with the temperature sensing circuit.
Moisture can create unwanted electrical paths between connections or contribute to corrosion over time. This possibility deserves particular attention if the E2 error appeared shortly after you thoroughly cleaned the appliance, accidentally spilled liquid into it, or stored it somewhere damp.
4. A Malfunctioning Control Board
The control board receives electrical signals from the temperature sensor and uses them to manage various cooking functions. Even when the sensor is functioning correctly, damage within the circuit responsible for interpreting its readings can cause an incorrect fault detection.
Other unusual behavior, such as unexpected restarts or unresponsive controls, may accompany a control board problem. However, these symptoms aren’t enough to establish a diagnosis. A technician must rule out sensor and wiring faults before concluding that the control board needs replacement.
Xiaomi Air Fryer E2 Error: DIY Fixes
You can perform several basic troubleshooting checks without taking your Xiaomi air fryer apart. However, since E2 usually indicates an electrical fault, these measures are intended to eliminate simple possibilities rather than repair damaged internal components.
1. Switch Off and Unplug Your Air Fryer
Start by disconnecting the air fryer from its power source. Xiaomi’s general troubleshooting guidance for E1 and E2 includes temporarily unplugging the appliance to determine whether the error clears.
Follow these steps:
-
Switch off your air fryer.
-
Unplug the power cord from the wall outlet.
-
Leave the appliance disconnected for several minutes.
-
Allow it to cool completely if you were cooking.
-
Reconnect it and switch it on without starting a cooking program, provided your model’s instructions permit this.
Disconnecting the power allows the control electronics to restart and may clear a temporary fault indication. Nevertheless, if the E2 error returns, repeatedly restarting the appliance won’t solve the underlying problem.
For models such as the Mijia Smart Steam Air Fryer 7L, Xiaomi specifically recommends disconnecting the appliance and arranging professional inspection when E2 appears. Follow the instructions for your particular model.
2. Check for Blocked Air Vents
Your Xiaomi air fryer relies on adequate airflow to distribute heat and cool its internal components. Placing the appliance too close to a wall or allowing objects to cover its ventilation openings can interfere with heat dissipation.
With the appliance unplugged and completely cool, examine the air inlet and exhaust openings. Remove nearby objects, accumulated surface dust, and anything else restricting airflow. Position the appliance on a stable, heat resistant surface with sufficient clearance around it, following the recommendations in your user manual.
Although blocked ventilation isn’t a confirmed direct cause of an E2 sensor short, Xiaomi recommends checking for airflow obstructions when troubleshooting temperature related errors. Clearing the vents also helps protect the appliance from unnecessary heat exposure.
3. Clean the Cooking Chamber
Grease, crumbs, and small food particles can gradually accumulate inside your air fryer. Besides producing unpleasant smells and smoke, excessive buildup around the heating area can interfere with normal operation.
Remove the basket and any detachable cooking accessories once the appliance has cooled. Wash these components according to your model’s cleaning instructions. A soft sponge, warm water, and mild dish soap are generally sufficient for removing stubborn food residue.
Examine the accessible surfaces inside the cooking chamber and remove loose debris using a soft cloth. Avoid scraping the temperature sensor, bending the heating element, or spraying cleaning products directly into the appliance. Allow everything to dry before reassembling it.
Cleaning may eliminate an obstruction contributing to abnormal heating, but it won’t restore a temperature sensor that has developed an electrical short.
4. Check for Signs of Moisture Exposure
Consider whether the error appeared after washing the air fryer, preparing food containing excessive liquid, or accidentally splashing water near the ventilation openings.
If the moisture is limited to accessible cooking surfaces, gently wipe them with a clean, dry cloth. Leave the basket outside the appliance until both the basket and cooking chamber are completely dry. You should never immerse the main body of a Xiaomi air fryer in water.
However, if you suspect water has entered the electrical housing, keep the appliance unplugged and arrange professional inspection. Avoid using a hair dryer or switching on the heating element to dry the internal components. Removing visible moisture doesn’t necessarily make the electrical system safe again.
5. Observe When the Error Appears
The timing of the error can provide useful information about the condition of your air fryer. It can also help a technician identify the fault without spending unnecessary time investigating unrelated components.
Think about the circumstances surrounding the error:
-
E2 appears immediately after switching on: A persistent sensor circuit fault may be present.
-
E2 appears during cooking: The fault may become apparent as internal components heat up.
-
E2 appeared after cleaning: Moisture exposure may be a contributing factor.
-
E2 disappears and returns randomly: An intermittent electrical fault may be responsible.
These observations are diagnostic clues rather than definitive findings. You shouldn’t deliberately run several cooking programs or increase the temperature to reproduce the error. Use what you’ve already observed to help narrow down the possibilities.
Also, avoid performing a factory reset or repeatedly resetting the Wi-Fi connection. These procedures address settings and connectivity issues and generally won’t repair a damaged temperature sensing circuit.
6. Contact a Qualified Appliance Repair Technician
If your Xiaomi air fryer continues displaying E2 after the recommended external checks, the next step is to have its internal components examined. Xiaomi recommends contacting an authorized service center for persistent temperature sensor errors.
A technician will typically investigate the temperature sensor, its electrical connections, and the relevant control board circuitry. Depending on the findings, the repair may involve replacing the sensor, repairing damaged wiring, or replacing a defective control board.
Avoid purchasing a replacement thermistor solely because another Xiaomi air fryer owner used it successfully. Temperature sensors have different resistance characteristics, operating limits, and connection arrangements. Installing an incompatible sensor could compromise temperature regulation.
Before contacting Xiaomi customer support, gather your appliance’s model number, purchase information, and details of when the error first appeared. If your air fryer is still under warranty, check your coverage before allowing anyone to dismantle it.
Stop using the appliance immediately if you notice a burning electrical smell, melted plastic, unusual smoke, or uncontrolled heating. These symptoms require professional attention regardless of whether the error remains on the display.
Wrapping Up
The E2 error on your Xiaomi air fryer deserves attention because it concerns one of the components responsible for keeping cooking temperatures under control. Although a temporary restart and some basic external checks may help eliminate simpler problems, a persistent error usually requires further investigation.
The best approach is to follow the troubleshooting instructions for your specific model and avoid unnecessary attempts to repair internal electrical components yourself. Getting the fault properly diagnosed can prevent further damage and help you return to preparing meals with confidence.