Your Popglory smartwatch just died, and now it won’t charge. You’ve plugged it in, waited, checked again, but that battery icon stays stubbornly empty. It’s frustrating, especially when you rely on your smartwatch to track your morning runs or keep tabs on your notifications throughout the day.
Before you consider buying a replacement or sending it off for expensive repairs, there’s good news. Most charging problems with Popglory smartwatches stem from simple issues you can fix yourself in just a few minutes. This guide walks you through everything you need to know about why your smartwatch stopped charging and exactly how to get it working again. You’ll learn the most common culprits behind charging failures and get step-by-step solutions that actually work.
What’s Really Happening When Your Smartwatch Won’t Charge
When your Popglory smartwatch refuses to charge, it’s usually not a sign that the device is completely broken. These smartwatches use magnetic charging cables that attach to metal contact points on the back of the watch. The electricity flows through these contacts to recharge the internal battery. But here’s the thing: this setup is pretty sensitive to interference.
Think of it like trying to make a phone call with bad reception. Even tiny obstacles can disrupt the connection between your charging cable and the watch. Something as small as a speck of dust can block the electrical flow. Your smartwatch might look like it’s charging because the cable snaps into place magnetically, but if those metal contacts aren’t making proper contact, no power actually transfers.
The battery inside your Popglory smartwatch is typically a lithium-ion battery, similar to what you’d find in your phone. These batteries need a steady, clean connection to charge properly. When they don’t get it, they simply stay dead. Over time, regular wear and exposure to sweat, moisture, and environmental debris can create barriers between the charging cable and the watch’s charging pins.
Most people assume their smartwatch is toast when it stops charging, but that’s rarely true. Your watch has probably collected some gunk, the cable might be damaged, or the charging adapter could be underpowered. These are all fixable problems that don’t require technical expertise or special tools.
Popglory Smartwatch Not Charging: Likely Causes
Understanding what’s causing your charging problem makes it much easier to fix. Here are the most common reasons why your Popglory smartwatch might be refusing to power up.
1. Dirty Charging Contacts
This is hands down the most frequent cause of charging failures. Those small metal circles on the back of your watch are magnets for trouble. Every time you wear your watch, it collects sweat, body oils, and dead skin cells. These substances build up on the charging contacts over time, creating an invisible barrier.
You might not even see the buildup with your naked eye. Sometimes it’s just a thin film of residue that’s enough to prevent the electrical connection. Lotion, sunscreen, and soap residue from washing your hands can also accumulate on these contacts. The magnetic charging cable picks up its own share of debris too.
When you try to charge your watch, the cable might attach firmly, but the electricity can’t flow through that layer of grime. Your watch sits there looking like it’s charging, but the battery percentage never budges. This problem gets worse in humid climates or if you exercise regularly while wearing your smartwatch.
2. Faulty Charging Cable
Charging cables take a beating. You bend them, twist them, stuff them in bags, and yank them out of outlets. The thin wires inside can break over time, even if the cable looks perfectly fine on the outside. Your Popglory charging cable might have internal damage that’s invisible to the eye.
The magnetic connector at the end of the cable is another weak point. If you’ve dropped it on hard surfaces or if metal objects have stuck to it while it was loose in a drawer, the connector might be damaged. Sometimes the magnets become misaligned, preventing the cable from sitting flush against the watch’s charging contacts.
3. Weak Power Source
Your watch might not be getting enough juice from wherever you’ve plugged it in. USB ports on older computers often don’t provide enough power to charge modern devices effectively. The same goes for cheap USB adapters or power banks that are running low on charge themselves.
Wall adapters have different power outputs, measured in amps. Your Popglory smartwatch needs a minimum amount of power to charge properly. If you’re using an adapter meant for older, less power-hungry devices, it might not deliver enough current. The watch might show it’s connected but charge incredibly slowly or not at all.
Some USB ports are designed only for data transfer and provide minimal power. If you’re plugging into a keyboard, monitor, or USB hub, you might not be getting sufficient power flow. Temperature matters too. Charging in very cold or hot conditions can prevent the battery from accepting a charge as a safety feature.
4. Battery in Deep Discharge State
If your smartwatch has been sitting dead for weeks or months, the battery might have entered a deep discharge state. Lithium-ion batteries don’t like being completely drained for extended periods. When they hit rock bottom and stay there, they can become difficult to wake up again.
This doesn’t mean your battery is permanently damaged, but it needs special attention to come back. The watch might not show any signs of charging at first because the battery is so depleted it can’t even power the charging indicator. You need to be patient and let it charge for longer than usual.
5. Software Glitch
Sometimes the problem isn’t physical at all. Your smartwatch’s software might have frozen or crashed, preventing it from recognizing that it’s connected to a charger. This can happen after a failed software update, when the watch’s memory gets full, or just randomly because electronics sometimes act up.
Your watch might be receiving power but not displaying the charging animation or responding to button presses. The screen stays black, making you think the battery is dead when really the system is just locked up. A simple restart often clears these software hiccups, but you need to know the right button combination to force it.
Popglory Smartwatch Not Charging: How to Fix
Let’s get your smartwatch charging again. These fixes are arranged from simplest to more involved, so work through them in order.
1. Clean the Charging Contacts Thoroughly
Start with the most likely culprit. Take a cotton swab and dip it in rubbing alcohol (isopropyl alcohol works best). Gently scrub the metal charging contacts on the back of your watch in circular motions. You’ll be surprised how much invisible grime comes off on that swab.
Pay special attention to the small grooves around each contact point where debris loves to hide. Let the alcohol evaporate completely before attempting to charge. This usually takes less than a minute. While you’re at it, clean the magnetic pins on your charging cable the same way. Alcohol dissolves oils and residue without leaving any moisture behind that could damage electronics.
If you don’t have rubbing alcohol handy, a slightly damp microfiber cloth can work in a pinch. Make sure it’s just barely damp, not wet. Dry everything thoroughly with a clean part of the cloth afterward. This simple cleaning solves the problem about 60% of the time.
2. Check and Replace the Charging Cable
Inspect your charging cable carefully. Look for any kinks, fraying, or damage to the cord itself. Bend it gently at different points while it’s plugged in to see if the connection is loose. If the cable feels warm to the touch when plugged in but not attached to the watch, that’s a red flag.
Try using a different Popglory charging cable if you have one, or borrow one from a friend who has the same watch. If a different cable works, you’ve found your problem. Replacement cables are inexpensive and widely available online. Make sure you’re buying one specifically designed for Popglory smartwatches, as generic magnetic charging cables might not align properly with your watch’s contact points.
3. Switch to a Stronger Power Source
Unplug your charging cable from wherever it’s currently connected. Plug it directly into a wall outlet using a quality USB adapter. Look for one that outputs at least 1 amp. Phone chargers usually work great because they’re designed to provide adequate power.
Avoid charging through your computer’s USB port, especially if it’s an older machine. Those ports often provide less power than wall outlets. If you’re using a power strip, make sure it’s turned on and working properly. Try a different outlet entirely to rule out problems with your electrical socket. Give your watch at least 30 minutes on this stronger power source before checking if it’s charging.
4. Perform a Hard Reset
If your watch still isn’t responding, it might be frozen. Press and hold the side button on your watch for about 15 to 20 seconds, even if nothing seems to happen. This forces the device to restart, similar to how you’d force restart a frozen phone.
After releasing the button, attach your charging cable and wait. Sometimes it takes a few minutes for the charging indicator to appear after a reset. The screen might flash briefly or show the charging icon. Be patient and leave it connected for at least an hour before judging whether the reset worked.
If your watch has multiple buttons, try different combinations. Some Popglory models require pressing specific buttons together to force a restart. Check your watch’s manual for the exact button combination.
5. Let It Charge for an Extended Period
This fix is especially important if your battery went into deep discharge. Attach your watch to a wall charger and leave it alone for at least two to three hours. Don’t keep disconnecting it to check if it’s working. Let it sit undisturbed.
The battery needs time to recover if it’s been completely drained for a while. You might not see any charging indicator for the first hour, and that’s okay. The battery is slowly waking up during this time. After three hours, check if the charging icon has appeared or if you can power on the watch.
Some users report needing to leave their watch charging overnight to bring it back from deep discharge. It’s frustrating to wait that long, but it beats buying a new watch.
6. Ensure Proper Cable Alignment
The magnetic charging cable needs to sit perfectly flush against your watch. Sometimes it attaches at a slight angle, and the contacts don’t line up properly. After connecting the cable, gently wiggle it to make sure it’s centered and sitting flat.
Look at the connection from the side. You shouldn’t see any gaps between the cable and the watch back. The magnets should hold it firmly in place without you needing to press or hold it. If the cable keeps falling off or sits at an angle, debris might be interfering, or the magnets in the cable could be weak. Try cleaning again or testing a different cable.
7. Contact a Professional Technician
If you’ve tried everything and your watch still won’t charge, it’s time to get professional help. The battery itself might be permanently damaged and need replacement, or there could be internal circuit board issues. Contact Popglory customer support first, especially if your watch is still under warranty.
Many electronics repair shops can replace smartwatch batteries for a reasonable fee. Make sure they have experience with smartwatches specifically. Attempting to open the watch yourself usually voids any warranty and can cause more damage if you’re not experienced with tiny electronics.
Wrapping Up
Getting your Popglory smartwatch charging again usually comes down to cleaning those contacts or switching your power source. These devices are tougher than they seem, and most charging problems have simple solutions you can handle yourself in minutes. Start with the easiest fixes and work your way through the list.
Keep your watch’s charging contacts clean by wiping them down weekly, especially if you work out regularly. Store your charging cable somewhere it won’t get bent or tangled. These small habits prevent most charging problems before they start. Your smartwatch should be back on your wrist and tracking your activities again soon.